FM / library

/usr/share/doc/python3-docs/html/_sources/library/

/usr/share/doc/python3-docs/html/_sources/library

Name	Size	Mode	Actions
2to3.rst.txt	15898	0644	edit dl rm
abc.rst.txt	11805	0644	edit dl rm
aifc.rst.txt	7503	0644	edit dl rm
allos.rst.txt	678	0644	edit dl rm
archiving.rst.txt	440	0644	edit dl rm
argparse.rst.txt	77480	0644	edit dl rm
array.rst.txt	10812	0644	edit dl rm
ast.rst.txt	10159	0644	edit dl rm
asynchat.rst.txt	8528	0644	edit dl rm
asyncio-dev.rst.txt	13398	0644	edit dl rm
asyncio-eventloop.rst.txt	33701	0644	edit dl rm
asyncio-eventloops.rst.txt	7660	0644	edit dl rm
asyncio-protocol.rst.txt	25170	0644	edit dl rm
asyncio-queue.rst.txt	4328	0644	edit dl rm
asyncio-stream.rst.txt	14363	0644	edit dl rm
asyncio-subprocess.rst.txt	15544	0644	edit dl rm
asyncio-sync.rst.txt	9078	0644	edit dl rm
asyncio-task.rst.txt	25406	0644	edit dl rm
asyncio.rst.txt	2272	0644	edit dl rm
asyncore.rst.txt	13624	0644	edit dl rm
atexit.rst.txt	3669	0644	edit dl rm
audioop.rst.txt	10712	0644	edit dl rm
base64.rst.txt	10371	0644	edit dl rm
bdb.rst.txt	12985	0644	edit dl rm
binary.rst.txt	654	0644	edit dl rm
binascii.rst.txt	6539	0644	edit dl rm
binhex.rst.txt	1709	0644	edit dl rm
bisect.rst.txt	5398	0644	edit dl rm
builtins.rst.txt	1465	0644	edit dl rm
bz2.rst.txt	8825	0644	edit dl rm
calendar.rst.txt	10988	0644	edit dl rm
cgi.rst.txt	22650	0644	edit dl rm
cgitb.rst.txt	2918	0644	edit dl rm
chunk.rst.txt	5094	0644	edit dl rm
cmath.rst.txt	9326	0644	edit dl rm
cmd.rst.txt	13795	0644	edit dl rm
code.rst.txt	7817	0644	edit dl rm
codecs.rst.txt	75564	0644	edit dl rm
codeop.rst.txt	3021	0644	edit dl rm
collections.abc.rst.txt	12861	0644	edit dl rm
collections.rst.txt	46063	0644	edit dl rm
colorsys.rst.txt	1820	0644	edit dl rm
compileall.rst.txt	8975	0644	edit dl rm
concurrency.rst.txt	673	0644	edit dl rm
concurrent.futures.rst.txt	16910	0644	edit dl rm
concurrent.rst.txt	171	0644	edit dl rm
configparser.rst.txt	48756	0644	edit dl rm
constants.rst.txt	3331	0644	edit dl rm
contextlib.rst.txt	28175	0644	edit dl rm
copy.rst.txt	3378	0644	edit dl rm
copyreg.rst.txt	2182	0644	edit dl rm
crypt.rst.txt	5122	0644	edit dl rm
crypto.rst.txt	411	0644	edit dl rm
csv.rst.txt	19902	0644	edit dl rm
ctypes.rst.txt	88613	0644	edit dl rm
curses.ascii.rst.txt	8920	0644	edit dl rm
curses.panel.rst.txt	2764	0644	edit dl rm
curses.rst.txt	76397	0644	edit dl rm
custominterp.rst.txt	569	0644	edit dl rm
datatypes.rst.txt	751	0644	edit dl rm
datetime.rst.txt	90524	0644	edit dl rm
dbm.rst.txt	14293	0644	edit dl rm
debug.rst.txt	471	0644	edit dl rm
decimal.rst.txt	74869	0644	edit dl rm
development.rst.txt	704	0644	edit dl rm
difflib.rst.txt	29861	0644	edit dl rm
dis.rst.txt	32567	0644	edit dl rm
distribution.rst.txt	452	0644	edit dl rm
distutils.rst.txt	1974	0644	edit dl rm
doctest.rst.txt	71743	0644	edit dl rm
dummy_threading.rst.txt	784	0644	edit dl rm
email.charset.rst.txt	9293	0644	edit dl rm
email.compat32-message.rst.txt	33493	0644	edit dl rm
email.contentmanager.rst.txt	9112	0644	edit dl rm
email.encoders.rst.txt	2715	0644	edit dl rm
email.errors.rst.txt	4792	0644	edit dl rm
email.examples.rst.txt	1915	0644	edit dl rm
email.generator.rst.txt	13637	0644	edit dl rm
email.header.rst.txt	9188	0644	edit dl rm
email.headerregistry.rst.txt	17957	0644	edit dl rm
email.iterators.rst.txt	2795	0644	edit dl rm
email.message.rst.txt	33008	0644	edit dl rm
email.mime.rst.txt	11721	0644	edit dl rm
email.parser.rst.txt	14092	0644	edit dl rm
email.policy.rst.txt	27022	0644	edit dl rm
email.rst.txt	6785	0644	edit dl rm
email.util.rst.txt	9214	0644	edit dl rm
ensurepip.rst.txt	4987	0644	edit dl rm
enum.rst.txt	32751	0644	edit dl rm
errno.rst.txt	6811	0644	edit dl rm
exceptions.rst.txt	25570	0644	edit dl rm
faulthandler.rst.txt	6136	0644	edit dl rm
fcntl.rst.txt	7152	0644	edit dl rm
filecmp.rst.txt	5623	0644	edit dl rm
fileformats.rst.txt	287	0644	edit dl rm
fileinput.rst.txt	8051	0644	edit dl rm
filesys.rst.txt	961	0644	edit dl rm
fnmatch.rst.txt	3103	0644	edit dl rm
formatter.rst.txt	13242	0644	edit dl rm
fpectl.rst.txt	4180	0644	edit dl rm
fractions.rst.txt	6364	0644	edit dl rm
frameworks.rst.txt	391	0644	edit dl rm
ftplib.rst.txt	17552	0644	edit dl rm
functional.rst.txt	365	0644	edit dl rm
functions.rst.txt	71621	0644	edit dl rm
functools.rst.txt	18503	0644	edit dl rm
gc.rst.txt	9694	0644	edit dl rm
getopt.rst.txt	6557	0644	edit dl rm
getpass.rst.txt	1882	0644	edit dl rm
gettext.rst.txt	25588	0644	edit dl rm
glob.rst.txt	3508	0644	edit dl rm
grp.rst.txt	2417	0644	edit dl rm
gzip.rst.txt	8301	0644	edit dl rm
hashlib.rst.txt	26523	0644	edit dl rm
heapq.rst.txt	13402	0644	edit dl rm
hmac.rst.txt	4020	0644	edit dl rm
html.entities.rst.txt	1319	0644	edit dl rm
html.parser.rst.txt	11275	0644	edit dl rm
html.rst.txt	1304	0644	edit dl rm
http.client.rst.txt	18870	0644	edit dl rm
http.cookiejar.rst.txt	27832	0644	edit dl rm
http.cookies.rst.txt	8645	0644	edit dl rm
http.rst.txt	7096	0644	edit dl rm
http.server.rst.txt	17639	0644	edit dl rm
i18n.rst.txt	408	0644	edit dl rm
idle.rst.txt	25834	0644	edit dl rm
imaplib.rst.txt	20367	0644	edit dl rm
imghdr.rst.txt	2938	0644	edit dl rm
imp.rst.txt	15548	0644	edit dl rm
importlib.rst.txt	53563	0644	edit dl rm
index.rst.txt	2258	0644	edit dl rm
inspect.rst.txt	53928	0644	edit dl rm
internet.rst.txt	992	0644	edit dl rm
intro.rst.txt	2645	0644	edit dl rm
io.rst.txt	40328	0644	edit dl rm
ipaddress.rst.txt	32340	0644	edit dl rm
ipc.rst.txt	649	0644	edit dl rm
itertools.rst.txt	38459	0644	edit dl rm
json.rst.txt	27876	0644	edit dl rm
keyword.rst.txt	617	0644	edit dl rm
language.rst.txt	522	0644	edit dl rm
linecache.rst.txt	2408	0644	edit dl rm
locale.rst.txt	25470	0644	edit dl rm
logging.config.rst.txt	33886	0644	edit dl rm
logging.handlers.rst.txt	42497	0644	edit dl rm
logging.rst.txt	60479	0644	edit dl rm
lzma.rst.txt	17361	0644	edit dl rm
macpath.rst.txt	707	0644	edit dl rm
mailbox.rst.txt	63055	0644	edit dl rm
mailcap.rst.txt	3691	0644	edit dl rm
markup.rst.txt	679	0644	edit dl rm
marshal.rst.txt	4855	0644	edit dl rm
math.rst.txt	14375	0644	edit dl rm
mimetypes.rst.txt	9839	0644	edit dl rm
misc.rst.txt	247	0644	edit dl rm
mm.rst.txt	431	0644	edit dl rm
mmap.rst.txt	11232	0644	edit dl rm
modulefinder.rst.txt	3240	0644	edit dl rm
modules.rst.txt	355	0644	edit dl rm
msilib.rst.txt	18612	0644	edit dl rm
msvcrt.rst.txt	4392	0644	edit dl rm
multiprocessing.rst.txt	104494	0644	edit dl rm
netdata.rst.txt	339	0644	edit dl rm
netrc.rst.txt	3007	0644	edit dl rm
nis.rst.txt	1993	0644	edit dl rm
nntplib.rst.txt	21821	0644	edit dl rm
numbers.rst.txt	8089	0644	edit dl rm
numeric.rst.txt	696	0644	edit dl rm
operator.rst.txt	18989	0644	edit dl rm
optparse.rst.txt	76996	0644	edit dl rm
os.path.rst.txt	16419	0644	edit dl rm
os.rst.txt	137534	0644	edit dl rm
ossaudiodev.rst.txt	17845	0644	edit dl rm
othergui.rst.txt	2822	0644	edit dl rm
parser.rst.txt	15148	0644	edit dl rm
pathlib.rst.txt	30045	0644	edit dl rm
pdb.rst.txt	19454	0644	edit dl rm
persistence.rst.txt	591	0644	edit dl rm
pickle.rst.txt	37440	0644	edit dl rm
pickletools.rst.txt	3729	0644	edit dl rm
pipes.rst.txt	2557	0644	edit dl rm
pkgutil.rst.txt	8730	0644	edit dl rm
platform.rst.txt	9624	0644	edit dl rm
plistlib.rst.txt	7398	0644	edit dl rm
poplib.rst.txt	8197	0644	edit dl rm
posix.rst.txt	3694	0644	edit dl rm
pprint.rst.txt	14274	0644	edit dl rm
profile.rst.txt	27969	0644	edit dl rm
pty.rst.txt	3123	0644	edit dl rm
pwd.rst.txt	2739	0644	edit dl rm
pyclbr.rst.txt	3297	0644	edit dl rm
pydoc.rst.txt	4688	0644	edit dl rm
pyexpat.rst.txt	28620	0644	edit dl rm
python.rst.txt	475	0644	edit dl rm
py_compile.rst.txt	3851	0644	edit dl rm
queue.rst.txt	7268	0644	edit dl rm
quopri.rst.txt	2571	0644	edit dl rm
random.rst.txt	18503	0644	edit dl rm
re.rst.txt	64936	0644	edit dl rm
readline.rst.txt	11943	0644	edit dl rm
reprlib.rst.txt	5162	0644	edit dl rm
resource.rst.txt	12291	0644	edit dl rm
rlcompleter.rst.txt	2294	0644	edit dl rm
runpy.rst.txt	8285	0644	edit dl rm
sched.rst.txt	4842	0644	edit dl rm
secrets.rst.txt	5930	0644	edit dl rm
select.rst.txt	28175	0644	edit dl rm
selectors.rst.txt	8925	0644	edit dl rm
shelve.rst.txt	8390	0644	edit dl rm
shlex.rst.txt	16441	0644	edit dl rm
shutil.rst.txt	26014	0644	edit dl rm
signal.rst.txt	17218	0644	edit dl rm
site.rst.txt	9628	0644	edit dl rm
smtpd.rst.txt	10806	0644	edit dl rm
smtplib.rst.txt	23439	0644	edit dl rm
sndhdr.rst.txt	1994	0644	edit dl rm
socket.rst.txt	68202	0644	edit dl rm
socketserver.rst.txt	23712	0644	edit dl rm
spwd.rst.txt	2958	0644	edit dl rm
sqlite3.rst.txt	39215	0644	edit dl rm
ssl.rst.txt	96021	0644	edit dl rm
stat.rst.txt	9805	0644	edit dl rm
statistics.rst.txt	15301	0644	edit dl rm
stdtypes.rst.txt	179240	0644	edit dl rm
string.rst.txt	35374	0644	edit dl rm
stringprep.rst.txt	4279	0644	edit dl rm
struct.rst.txt	19581	0644	edit dl rm
subprocess.rst.txt	45793	0644	edit dl rm
sunau.rst.txt	7390	0644	edit dl rm
superseded.rst.txt	258	0644	edit dl rm
symbol.rst.txt	975	0644	edit dl rm
symtable.rst.txt	4964	0644	edit dl rm
sys.rst.txt	58273	0644	edit dl rm
sysconfig.rst.txt	8749	0644	edit dl rm
syslog.rst.txt	4302	0644	edit dl rm
tabnanny.rst.txt	2007	0644	edit dl rm
tarfile.rst.txt	31749	0644	edit dl rm
telnetlib.rst.txt	7899	0644	edit dl rm
tempfile.rst.txt	13857	0644	edit dl rm
termios.rst.txt	3751	0644	edit dl rm
test.rst.txt	25764	0644	edit dl rm
text.rst.txt	584	0644	edit dl rm
textwrap.rst.txt	10519	0644	edit dl rm
threading.rst.txt	39257	0644	edit dl rm
time.rst.txt	32967	0644	edit dl rm
timeit.rst.txt	13000	0644	edit dl rm
tk.rst.txt	1639	0644	edit dl rm
tkinter.rst.txt	33027	0644	edit dl rm
tkinter.scrolledtext.rst.txt	1255	0644	edit dl rm
tkinter.tix.rst.txt	22653	0644	edit dl rm
tkinter.ttk.rst.txt	58489	0644	edit dl rm
token.rst.txt	2607	0644	edit dl rm
tokenize.rst.txt	10002	0644	edit dl rm
trace.rst.txt	6914	0644	edit dl rm
traceback.rst.txt	17854	0644	edit dl rm
tracemalloc.rst.txt	22089	0644	edit dl rm
tty.rst.txt	1097	0644	edit dl rm
turtle.rst.txt	71221	0644	edit dl rm
types.rst.txt	9999	0644	edit dl rm
typing.rst.txt	34332	0644	edit dl rm
undoc.rst.txt	780	0644	edit dl rm
unicodedata.rst.txt	5762	0644	edit dl rm
unittest.mock-examples.rst.txt	46206	0644	edit dl rm
unittest.mock.rst.txt	85991	0644	edit dl rm
unittest.rst.txt	93304	0644	edit dl rm
unix.rst.txt	446	0644	edit dl rm
urllib.error.rst.txt	2199	0644	edit dl rm
urllib.parse.rst.txt	27332	0644	edit dl rm
urllib.request.rst.txt	59360	0644	edit dl rm
urllib.robotparser.rst.txt	2969	0644	edit dl rm
urllib.rst.txt	466	0644	edit dl rm
uu.rst.txt	2387	0644	edit dl rm
uuid.rst.txt	8760	0644	edit dl rm
venv.rst.txt	20621	0644	edit dl rm
warnings.rst.txt	20152	0644	edit dl rm
wave.rst.txt	6870	0644	edit dl rm
weakref.rst.txt	21328	0644	edit dl rm
webbrowser.rst.txt	9783	0644	edit dl rm
windows.rst.txt	272	0644	edit dl rm
winreg.rst.txt	24073	0644	edit dl rm
winsound.rst.txt	5134	0644	edit dl rm
wsgiref.rst.txt	33047	0644	edit dl rm
xdrlib.rst.txt	8078	0644	edit dl rm
xml.dom.minidom.rst.txt	10198	0644	edit dl rm
xml.dom.pulldom.rst.txt	5186	0644	edit dl rm
xml.dom.rst.txt	39507	0644	edit dl rm
xml.etree.elementtree.rst.txt	43871	0644	edit dl rm
xml.rst.txt	6071	0644	edit dl rm
xml.sax.handler.rst.txt	15399	0644	edit dl rm
xml.sax.reader.rst.txt	12133	0644	edit dl rm
xml.sax.rst.txt	7159	0644	edit dl rm
xml.sax.utils.rst.txt	3901	0644	edit dl rm
xmlrpc.client.rst.txt	23071	0644	edit dl rm
xmlrpc.rst.txt	475	0644	edit dl rm
xmlrpc.server.rst.txt	14990	0644	edit dl rm
zipapp.rst.txt	17392	0644	edit dl rm
zipfile.rst.txt	24005	0644	edit dl rm
zipimport.rst.txt	5805	0644	edit dl rm
zlib.rst.txt	13912	0644	edit dl rm
_dummy_thread.rst.txt	762	0644	edit dl rm
_thread.rst.txt	6886	0644	edit dl rm
__future__.rst.txt	5245	0644	edit dl rm
__main__.rst.txt	904	0644	edit dl rm

Edit: /usr/share/doc/python3-docs/html/_sources/library/curses.rst.txt (76397B)

:mod:`curses` --- Terminal handling for character-cell displays
===============================================================

.. module:: curses
   :synopsis: An interface to the curses library, providing portable
              terminal handling.
   :platform: Unix

.. sectionauthor:: Moshe Zadka <moshez@zadka.site.co.il>
.. sectionauthor:: Eric Raymond <esr@thyrsus.com>

--------------

The :mod:`curses` module provides an interface to the curses library, the
de-facto standard for portable advanced terminal handling.

While curses is most widely used in the Unix environment, versions are available
for Windows, DOS, and possibly other systems as well.  This extension module is
designed to match the API of ncurses, an open-source curses library hosted on
Linux and the BSD variants of Unix.

.. note::

Whenever the documentation mentions a *character* it can be specified
   as an integer, a one-character Unicode string or a one-byte byte string.

Whenever the documentation mentions a *character string* it can be specified
   as a Unicode string or a byte string.

.. note::

Since version 5.4, the ncurses library decides how to interpret non-ASCII data
   using the ``nl_langinfo`` function.  That means that you have to call
   :func:`locale.setlocale` in the application and encode Unicode strings
   using one of the system's available encodings.  This example uses the
   system's default encoding::

import locale
      locale.setlocale(locale.LC_ALL, '')
      code = locale.getpreferredencoding()

Then use *code* as the encoding for :meth:`str.encode` calls.

.. seealso::

Module :mod:`curses.ascii`
      Utilities for working with ASCII characters, regardless of your locale settings.

Module :mod:`curses.panel`
      A panel stack extension that adds depth to  curses windows.

Module :mod:`curses.textpad`
      Editable text widget for curses supporting  :program:`Emacs`\ -like bindings.

:ref:`curses-howto`
      Tutorial material on using curses with Python, by Andrew Kuchling and Eric
      Raymond.

The :source:`Tools/demo/` directory in the Python source distribution contains
   some example programs using the curses bindings provided by this module.

.. _curses-functions:

Functions
---------

The module :mod:`curses` defines the following exception:

.. exception:: error

Exception raised when a curses library function returns an error.

.. note::

Whenever *x* or *y* arguments to a function or a method are optional, they
   default to the current cursor location. Whenever *attr* is optional, it defaults
   to :const:`A_NORMAL`.

The module :mod:`curses` defines the following functions:

.. function:: baudrate()

Return the output speed of the terminal in bits per second.  On software
   terminal emulators it will have a fixed high value. Included for historical
   reasons; in former times, it was used to  write output loops for time delays and
   occasionally to change interfaces depending on the line speed.

.. function:: beep()

Emit a short attention sound.

.. function:: can_change_color()

Return ``True`` or ``False``, depending on whether the programmer can change the colors
   displayed by the terminal.

.. function:: cbreak()

Enter cbreak mode.  In cbreak mode (sometimes called "rare" mode) normal tty
   line buffering is turned off and characters are available to be read one by one.
   However, unlike raw mode, special characters (interrupt, quit, suspend, and flow
   control) retain their effects on the tty driver and calling program.  Calling
   first :func:`raw` then :func:`cbreak` leaves the terminal in cbreak mode.

.. function:: color_content(color_number)

Return the intensity of the red, green, and blue (RGB) components in the color
   *color_number*, which must be between ``0`` and :const:`COLORS`.  Return a 3-tuple,
   containing the R,G,B values for the given color, which will be between
   ``0`` (no component) and ``1000`` (maximum amount of component).

.. function:: color_pair(color_number)

Return the attribute value for displaying text in the specified color.  This
   attribute value can be combined with :const:`A_STANDOUT`, :const:`A_REVERSE`,
   and the other :const:`A_\*` attributes.  :func:`pair_number` is the counterpart
   to this function.

.. function:: curs_set(visibility)

Set the cursor state.  *visibility* can be set to ``0``, ``1``, or ``2``, for invisible,
   normal, or very visible.  If the terminal supports the visibility requested, return the
   previous cursor state; otherwise raise an exception.  On many
   terminals, the "visible" mode is an underline cursor and the "very visible" mode
   is a block cursor.

.. function:: def_prog_mode()

Save the current terminal mode as the "program" mode, the mode when the running
   program is using curses.  (Its counterpart is the "shell" mode, for when the
   program is not in curses.)  Subsequent calls to :func:`reset_prog_mode` will
   restore this mode.

.. function:: def_shell_mode()

Save the current terminal mode as the "shell" mode, the mode when the running
   program is not using curses.  (Its counterpart is the "program" mode, when the
   program is using curses capabilities.) Subsequent calls to
   :func:`reset_shell_mode` will restore this mode.

.. function:: delay_output(ms)

Insert an *ms* millisecond pause in output.

.. function:: doupdate()

Update the physical screen.  The curses library keeps two data structures, one
   representing the current physical screen contents and a virtual screen
   representing the desired next state.  The :func:`doupdate` ground updates the
   physical screen to match the virtual screen.

The virtual screen may be updated by a :meth:`~window.noutrefresh` call after write
   operations such as :meth:`~window.addstr` have been performed on a window.  The normal
   :meth:`~window.refresh` call is simply :meth:`!noutrefresh` followed by :func:`!doupdate`;
   if you have to update multiple windows, you can speed performance and perhaps
   reduce screen flicker by issuing :meth:`!noutrefresh` calls on all windows,
   followed by a single :func:`!doupdate`.

.. function:: echo()

Enter echo mode.  In echo mode, each character input is echoed to the screen as
   it is entered.

.. function:: endwin()

De-initialize the library, and return terminal to normal status.

.. function:: erasechar()

Return the user's current erase character as a one-byte bytes object.  Under Unix operating systems this
   is a property of the controlling tty of the curses program, and is not set by
   the curses library itself.

.. function:: filter()

The :func:`.filter` routine, if used, must be called before :func:`initscr` is
   called.  The effect is that, during those calls, :envvar:`LINES` is set to ``1``; the
   capabilities ``clear``, ``cup``, ``cud``, ``cud1``, ``cuu1``, ``cuu``, ``vpa`` are disabled; and the ``home``
   string is set to the value of ``cr``. The effect is that the cursor is confined to
   the current line, and so are screen updates.  This may be used for enabling
   character-at-a-time  line editing without touching the rest of the screen.

.. function:: flash()

Flash the screen.  That is, change it to reverse-video and then change it back
   in a short interval.  Some people prefer such as 'visible bell' to the audible
   attention signal produced by :func:`beep`.

.. function:: flushinp()

Flush all input buffers.  This throws away any  typeahead  that  has been typed
   by the user and has not yet been processed by the program.

.. function:: getmouse()

After :meth:`~window.getch` returns :const:`KEY_MOUSE` to signal a mouse event, this
   method should be call to retrieve the queued mouse event, represented as a
   5-tuple ``(id, x, y, z, bstate)``. *id* is an ID value used to distinguish
   multiple devices, and *x*, *y*, *z* are the event's coordinates.  (*z* is
   currently unused.)  *bstate* is an integer value whose bits will be set to
   indicate the type of event, and will be the bitwise OR of one or more of the
   following constants, where *n* is the button number from 1 to 4:
   :const:`BUTTONn_PRESSED`, :const:`BUTTONn_RELEASED`, :const:`BUTTONn_CLICKED`,
   :const:`BUTTONn_DOUBLE_CLICKED`, :const:`BUTTONn_TRIPLE_CLICKED`,
   :const:`BUTTON_SHIFT`, :const:`BUTTON_CTRL`, :const:`BUTTON_ALT`.

.. function:: getsyx()

Return the current coordinates of the virtual screen cursor as a tuple
   ``(y, x)``.  If :meth:`leaveok <window.leaveok>` is currently ``True``, then return ``(-1, -1)``.

.. function:: getwin(file)

Read window related data stored in the file by an earlier :func:`putwin` call.
   The routine then creates and initializes a new window using that data, returning
   the new window object.

.. function:: has_colors()

Return ``True`` if the terminal can display colors; otherwise, return ``False``.

.. function:: has_ic()

Return ``True`` if the terminal has insert- and delete-character capabilities.
   This function is included for historical reasons only, as all modern software
   terminal emulators have such capabilities.

.. function:: has_il()

Return ``True`` if the terminal has insert- and delete-line capabilities, or can
   simulate  them  using scrolling regions. This function is included for
   historical reasons only, as all modern software terminal emulators have such
   capabilities.

.. function:: has_key(ch)

Take a key value *ch*, and return ``True`` if the current terminal type recognizes
   a key with that value.

.. function:: halfdelay(tenths)

Used for half-delay mode, which is similar to cbreak mode in that characters
   typed by the user are immediately available to the program. However, after
   blocking for *tenths* tenths of seconds, raise an exception if nothing has
   been typed.  The value of *tenths* must be a number between ``1`` and ``255``.  Use
   :func:`nocbreak` to leave half-delay mode.

.. function:: init_color(color_number, r, g, b)

Change the definition of a color, taking the number of the color to be changed
   followed by three RGB values (for the amounts of red, green, and blue
   components).  The value of *color_number* must be between ``0`` and
   :const:`COLORS`.  Each of *r*, *g*, *b*, must be a value between ``0`` and
   ``1000``.  When :func:`init_color` is used, all occurrences of that color on the
   screen immediately change to the new definition.  This function is a no-op on
   most terminals; it is active only if :func:`can_change_color` returns ``True``.

.. function:: init_pair(pair_number, fg, bg)

Change the definition of a color-pair.  It takes three arguments: the number of
   the color-pair to be changed, the foreground color number, and the background
   color number.  The value of *pair_number* must be between ``1`` and
   ``COLOR_PAIRS - 1`` (the ``0`` color pair is wired to white on black and cannot
   be changed).  The value of *fg* and *bg* arguments must be between ``0`` and
   :const:`COLORS`.  If the color-pair was previously initialized, the screen is
   refreshed and all occurrences of that color-pair are changed to the new
   definition.

.. function:: initscr()

Initialize the library. Return a :ref:`window <curses-window-objects>` object
   which represents the whole screen.

.. note::

If there is an error opening the terminal, the underlying curses library may
      cause the interpreter to exit.

.. function:: is_term_resized(nlines, ncols)

Return ``True`` if :func:`resize_term` would modify the window structure,
   ``False`` otherwise.

.. function:: isendwin()

Return ``True`` if :func:`endwin` has been called (that is, the  curses library has
   been deinitialized).

.. function:: keyname(k)

Return the name of the key numbered *k* as a bytes object.  The name of a key generating printable
   ASCII character is the key's character.  The name of a control-key combination
   is a two-byte bytes object consisting of a caret (``b'^'``) followed by the corresponding
   printable ASCII character.  The name of an alt-key combination (128--255) is a
   bytes object consisting of the prefix ``b'M-'`` followed by the name of the corresponding
   ASCII character.

.. function:: killchar()

Return the user's current line kill character as a one-byte bytes object. Under Unix operating systems
   this is a property of the controlling tty of the curses program, and is not set
   by the curses library itself.

.. function:: longname()

Return a bytes object containing the terminfo long name field describing the current
   terminal.  The maximum length of a verbose description is 128 characters.  It is
   defined only after the call to :func:`initscr`.

.. function:: meta(flag)

If *flag* is ``True``, allow 8-bit characters to be input.  If
   *flag* is ``False``,  allow only 7-bit chars.

.. function:: mouseinterval(interval)

Set the maximum time in milliseconds that can elapse between press and release
   events in order for them to be recognized as a click, and return the previous
   interval value.  The default value is 200 msec, or one fifth of a second.

.. function:: mousemask(mousemask)

Set the mouse events to be reported, and return a tuple ``(availmask,
   oldmask)``.   *availmask* indicates which of the specified mouse events can be
   reported; on complete failure it returns ``0``.  *oldmask* is the previous value of
   the given window's mouse event mask.  If this function is never called, no mouse
   events are ever reported.

.. function:: napms(ms)

Sleep for *ms* milliseconds.

.. function:: newpad(nlines, ncols)

Create and return a pointer to a new pad data structure with the given number
   of lines and columns.  Return a pad as a window object.

A pad is like a window, except that it is not restricted by the screen size, and
   is not necessarily associated with a particular part of the screen.  Pads can be
   used when a large window is needed, and only a part of the window will be on the
   screen at one time.  Automatic refreshes of pads (such as from scrolling or
   echoing of input) do not occur.  The :meth:`~window.refresh` and :meth:`~window.noutrefresh`
   methods of a pad require 6 arguments to specify the part of the pad to be
   displayed and the location on the screen to be used for the display. The
   arguments are *pminrow*, *pmincol*, *sminrow*, *smincol*, *smaxrow*, *smaxcol*; the *p*
   arguments refer to the upper left corner of the pad region to be displayed and
   the *s* arguments define a clipping box on the screen within which the pad region
   is to be displayed.

.. function:: newwin(nlines, ncols)
              newwin(nlines, ncols, begin_y, begin_x)

Return a new :ref:`window <curses-window-objects>`, whose left-upper corner
   is at  ``(begin_y, begin_x)``, and whose height/width is  *nlines*/*ncols*.

By default, the window will extend from the  specified position to the lower
   right corner of the screen.

.. function:: nl()

Enter newline mode.  This mode translates the return key into newline on input,
   and translates newline into return and line-feed on output. Newline mode is
   initially on.

.. function:: nocbreak()

Leave cbreak mode.  Return to normal "cooked" mode with line buffering.

.. function:: noecho()

Leave echo mode.  Echoing of input characters is turned off.

.. function:: nonl()

Leave newline mode.  Disable translation of return into newline on input, and
   disable low-level translation of newline into newline/return on output (but this
   does not change the behavior of ``addch('\n')``, which always does the
   equivalent of return and line feed on the virtual screen).  With translation
   off, curses can sometimes speed up vertical motion a little; also, it will be
   able to detect the return key on input.

.. function:: noqiflush()

When the :func:`!noqiflush` routine is used, normal flush of input and output queues
   associated with the ``INTR``, ``QUIT`` and ``SUSP`` characters will not be done.  You may
   want to call :func:`!noqiflush` in a signal handler if you want output to
   continue as though the interrupt had not occurred, after the handler exits.

.. function:: noraw()

Leave raw mode. Return to normal "cooked" mode with line buffering.

.. function:: pair_content(pair_number)

Return a tuple ``(fg, bg)`` containing the colors for the requested color pair.
   The value of *pair_number* must be between ``1`` and ``COLOR_PAIRS - 1``.

.. function:: pair_number(attr)

Return the number of the color-pair set by the attribute value *attr*.
   :func:`color_pair` is the counterpart to this function.

.. function:: putp(str)

Equivalent to ``tputs(str, 1, putchar)``; emit the value of a specified
   terminfo capability for the current terminal.  Note that the output of :func:`putp`
   always goes to standard output.

.. function:: qiflush([flag])

If *flag* is ``False``, the effect is the same as calling :func:`noqiflush`. If
   *flag* is ``True``, or no argument is provided, the queues will be flushed when
   these control characters are read.

.. function:: raw()

Enter raw mode.  In raw mode, normal line buffering and  processing of
   interrupt, quit, suspend, and flow control keys are turned off; characters are
   presented to curses input functions one by one.

.. function:: reset_prog_mode()

Restore the  terminal  to "program" mode, as previously saved  by
   :func:`def_prog_mode`.

.. function:: reset_shell_mode()

Restore the  terminal  to "shell" mode, as previously saved  by
   :func:`def_shell_mode`.

.. function:: resetty()

Restore the state of the terminal modes to what it was at the last call to
   :func:`savetty`.

.. function:: resize_term(nlines, ncols)

Backend function used by :func:`resizeterm`, performing most of the work;
   when resizing the windows, :func:`resize_term` blank-fills the areas that are
   extended.  The calling application should fill in these areas with
   appropriate data.  The :func:`!resize_term` function attempts to resize all
   windows.  However, due to the calling convention of pads, it is not possible
   to resize these without additional interaction with the application.

.. function:: resizeterm(nlines, ncols)

Resize the standard and current windows to the specified dimensions, and
   adjusts other bookkeeping data used by the curses library that record the
   window dimensions (in particular the SIGWINCH handler).

.. function:: savetty()

Save the current state of the terminal modes in a buffer, usable by
   :func:`resetty`.

.. function:: setsyx(y, x)

Set the virtual screen cursor to *y*, *x*. If *y* and *x* are both ``-1``, then
   :meth:`leaveok <window.leaveok>` is set ``True``.

.. function:: setupterm(term=None, fd=-1)

Initialize the terminal.  *term* is a string giving
   the terminal name, or ``None``; if omitted or ``None``, the value of the
   :envvar:`TERM` environment variable will be used.  *fd* is the
   file descriptor to which any initialization sequences will be sent; if not
   supplied or ``-1``, the file descriptor for ``sys.stdout`` will be used.

.. function:: start_color()

Must be called if the programmer wants to use colors, and before any other color
   manipulation routine is called.  It is good practice to call this routine right
   after :func:`initscr`.

:func:`start_color` initializes eight basic colors (black, red,  green, yellow,
   blue, magenta, cyan, and white), and two global variables in the :mod:`curses`
   module, :const:`COLORS` and :const:`COLOR_PAIRS`, containing the maximum number
   of colors and color-pairs the terminal can support.  It also restores the colors
   on the terminal to the values they had when the terminal was just turned on.

.. function:: termattrs()

Return a logical OR of all video attributes supported by the terminal.  This
   information is useful when a curses program needs complete control over the
   appearance of the screen.

.. function:: termname()

Return the value of the environment variable :envvar:`TERM`, as a bytes object,
   truncated to 14 characters.

.. function:: tigetflag(capname)

Return the value of the Boolean capability corresponding to the terminfo
   capability name *capname* as an integer.  Return the value ``-1`` if *capname* is not a
   Boolean capability, or ``0`` if it is canceled or absent from the terminal
   description.

.. function:: tigetnum(capname)

Return the value of the numeric capability corresponding to the terminfo
   capability name *capname* as an integer.  Return the value ``-2`` if *capname* is not a
   numeric capability, or ``-1`` if it is canceled or absent from the terminal
   description.

.. function:: tigetstr(capname)

Return the value of the string capability corresponding to the terminfo
   capability name *capname* as a bytes object.  Return ``None`` if *capname*
   is not a terminfo "string capability", or is canceled or absent from the
   terminal description.

.. function:: tparm(str[, ...])

Instantiate the bytes object *str* with the supplied parameters, where *str* should
   be a parameterized string obtained from the terminfo database.  E.g.
   ``tparm(tigetstr("cup"), 5, 3)`` could result in ``b'\033[6;4H'``, the exact
   result depending on terminal type.

.. function:: typeahead(fd)

Specify that the file descriptor *fd* be used for typeahead checking.  If *fd*
   is ``-1``, then no typeahead checking is done.

The curses library does "line-breakout optimization" by looking for typeahead
   periodically while updating the screen.  If input is found, and it is coming
   from a tty, the current update is postponed until refresh or doupdate is called
   again, allowing faster response to commands typed in advance. This function
   allows specifying a different file descriptor for typeahead checking.

.. function:: unctrl(ch)

Return a bytes object which is a printable representation of the character *ch*.
   Control characters are represented as a caret followed by the character, for
   example as ``b'^C'``. Printing characters are left as they are.

.. function:: ungetch(ch)

Push *ch* so the next :meth:`~window.getch` will return it.

.. note::

Only one *ch* can be pushed before :meth:`!getch` is called.

.. function:: update_lines_cols()

Update :envvar:`LINES` and :envvar:`COLS`. Useful for detecting manual screen resize.

.. versionadded:: 3.5

.. function:: unget_wch(ch)

Push *ch* so the next :meth:`~window.get_wch` will return it.

.. note::

Only one *ch* can be pushed before :meth:`!get_wch` is called.

.. versionadded:: 3.3

.. function:: ungetmouse(id, x, y, z, bstate)

Push a :const:`KEY_MOUSE` event onto the input queue, associating the given
   state data with it.

.. function:: use_env(flag)

If used, this function should be called before :func:`initscr` or newterm are
   called.  When *flag* is ``False``, the values of lines and columns specified in the
   terminfo database will be used, even if environment variables :envvar:`LINES`
   and :envvar:`COLUMNS` (used by default) are set, or if curses is running in a
   window (in which case default behavior would be to use the window size if
   :envvar:`LINES` and :envvar:`COLUMNS` are not set).

.. function:: use_default_colors()

Allow use of default values for colors on terminals supporting this feature. Use
   this to support transparency in your application.  The default color is assigned
   to the color number ``-1``. After calling this function,  ``init_pair(x,
   curses.COLOR_RED, -1)`` initializes, for instance, color pair *x* to a red
   foreground color on the default background.

.. function:: wrapper(func, ...)

Initialize curses and call another callable object, *func*, which should be the
   rest of your curses-using application.  If the application raises an exception,
   this function will restore the terminal to a sane state before re-raising the
   exception and generating a traceback.  The callable object *func* is then passed
   the main window 'stdscr' as its first argument, followed by any other arguments
   passed to :func:`!wrapper`.  Before calling *func*, :func:`!wrapper` turns on
   cbreak mode, turns off echo, enables the terminal keypad, and initializes colors
   if the terminal has color support.  On exit (whether normally or by exception)
   it restores cooked mode, turns on echo, and disables the terminal keypad.

.. _curses-window-objects:

Window Objects
--------------

Window objects, as returned by :func:`initscr` and :func:`newwin` above, have
the following methods and attributes:

.. method:: window.addch(ch[, attr])
            window.addch(y, x, ch[, attr])

Paint character *ch* at ``(y, x)`` with attributes *attr*, overwriting any
   character previously painter at that location.  By default, the character
   position and attributes are the current settings for the window object.

.. note::

Writing outside the window, subwindow, or pad raises a :exc:`curses.error`.
      Attempting to write to the lower right corner of a window, subwindow,
      or pad will cause an exception to be raised after the character is printed.

.. method:: window.addnstr(str, n[, attr])
            window.addnstr(y, x, str, n[, attr])

Paint at most *n* characters of the character string *str* at
   ``(y, x)`` with attributes
   *attr*, overwriting anything previously on the display.

.. method:: window.addstr(str[, attr])
            window.addstr(y, x, str[, attr])

Paint the character string *str* at ``(y, x)`` with attributes
   *attr*, overwriting anything previously on the display.

.. note::

Writing outside the window, subwindow, or pad raises :exc:`curses.error`.
      Attempting to write to the lower right corner of a window, subwindow,
      or pad will cause an exception to be raised after the string is printed.

.. method:: window.attroff(attr)

Remove attribute *attr* from the "background" set applied to all writes to the
   current window.

.. method:: window.attron(attr)

Add attribute *attr* from the "background" set applied to all writes to the
   current window.

.. method:: window.attrset(attr)

Set the "background" set of attributes to *attr*.  This set is initially
   ``0`` (no attributes).

.. method:: window.bkgd(ch[, attr])

Set the background property of the window to the character *ch*, with
   attributes *attr*.  The change is then applied to every character position in
   that window:

* The attribute of every character in the window  is changed to the new
     background attribute.

* Wherever  the  former background character appears, it is changed to the new
     background character.

.. method:: window.bkgdset(ch[, attr])

Set the window's background.  A window's background consists of a character and
   any combination of attributes.  The attribute part of the background is combined
   (OR'ed) with all non-blank characters that are written into the window.  Both
   the character and attribute parts of the background are combined with the blank
   characters.  The background becomes a property of the character and moves with
   the character through any scrolling and insert/delete line/character operations.

.. method:: window.border([ls[, rs[, ts[, bs[, tl[, tr[, bl[, br]]]]]]]])

Draw a border around the edges of the window. Each parameter specifies  the
   character to use for a specific part of the border; see the table below for more
   details.

.. note::

A ``0`` value for any parameter will cause the default character to be used for
      that parameter.  Keyword parameters can *not* be used.  The defaults are listed
      in this table:

+-----------+---------------------+-----------------------+
   | Parameter | Description         | Default value         |
   +===========+=====================+=======================+
   | *ls*      | Left side           | :const:`ACS_VLINE`    |
   +-----------+---------------------+-----------------------+
   | *rs*      | Right side          | :const:`ACS_VLINE`    |
   +-----------+---------------------+-----------------------+
   | *ts*      | Top                 | :const:`ACS_HLINE`    |
   +-----------+---------------------+-----------------------+
   | *bs*      | Bottom              | :const:`ACS_HLINE`    |
   +-----------+---------------------+-----------------------+
   | *tl*      | Upper-left corner   | :const:`ACS_ULCORNER` |
   +-----------+---------------------+-----------------------+
   | *tr*      | Upper-right corner  | :const:`ACS_URCORNER` |
   +-----------+---------------------+-----------------------+
   | *bl*      | Bottom-left corner  | :const:`ACS_LLCORNER` |
   +-----------+---------------------+-----------------------+
   | *br*      | Bottom-right corner | :const:`ACS_LRCORNER` |
   +-----------+---------------------+-----------------------+

.. method:: window.box([vertch, horch])

Similar to :meth:`border`, but both *ls* and *rs* are *vertch* and both *ts* and
   *bs* are *horch*.  The default corner characters are always used by this function.

.. method:: window.chgat(attr)
            window.chgat(num, attr)
            window.chgat(y, x, attr)
            window.chgat(y, x, num, attr)

Set the attributes of *num* characters at the current cursor position, or at
   position ``(y, x)`` if supplied. If *num* is not given or is ``-1``,
   the attribute will be set on all the characters to the end of the line.  This
   function moves cursor to position ``(y, x)`` if supplied. The changed line
   will be touched using the :meth:`touchline` method so that the contents will
   be redisplayed by the next window refresh.

.. method:: window.clear()

Like :meth:`erase`, but also cause the whole window to be repainted upon next
   call to :meth:`refresh`.

.. method:: window.clearok(flag)

If *flag* is ``True``, the next call to :meth:`refresh` will clear the window
   completely.

.. method:: window.clrtobot()

Erase from cursor to the end of the window: all lines below the cursor are
   deleted, and then the equivalent of :meth:`clrtoeol` is performed.

.. method:: window.clrtoeol()

Erase from cursor to the end of the line.

.. method:: window.cursyncup()

Update the current cursor position of all the ancestors of the window to
   reflect the current cursor position of the window.

.. method:: window.delch([y, x])

Delete any character at ``(y, x)``.

.. method:: window.deleteln()

Delete the line under the cursor. All following lines are moved up by one line.

.. method:: window.derwin(begin_y, begin_x)
            window.derwin(nlines, ncols, begin_y, begin_x)

An abbreviation for "derive window", :meth:`derwin` is the same as calling
   :meth:`subwin`, except that *begin_y* and *begin_x* are relative to the origin
   of the window, rather than relative to the entire screen.  Return a window
   object for the derived window.

.. method:: window.echochar(ch[, attr])

Add character *ch* with attribute *attr*, and immediately  call :meth:`refresh`
   on the window.

.. method:: window.enclose(y, x)

Test whether the given pair of screen-relative character-cell coordinates are
   enclosed by the given window, returning ``True`` or ``False``.  It is useful for
   determining what subset of the screen windows enclose the location of a mouse
   event.

.. attribute:: window.encoding

Encoding used to encode method arguments (Unicode strings and characters).
   The encoding attribute is inherited from the parent window when a subwindow
   is created, for example with :meth:`window.subwin`. By default, the locale
   encoding is used (see :func:`locale.getpreferredencoding`).

.. versionadded:: 3.3

.. method:: window.erase()

Clear the window.

.. method:: window.getbegyx()

Return a tuple ``(y, x)`` of co-ordinates of upper-left corner.

.. method:: window.getbkgd()

Return the given window's current background character/attribute pair.

.. method:: window.getch([y, x])

Get a character. Note that the integer returned does *not* have to be in ASCII
   range: function keys, keypad keys and so on are represented by numbers higher
   than 255.  In no-delay mode, return ``-1`` if there is no input, otherwise
   wait until a key is pressed.

.. method:: window.get_wch([y, x])

Get a wide character. Return a character for most keys, or an integer for
   function keys, keypad keys, and other special keys.
   In no-delay mode, raise an exception if there is no input.

.. versionadded:: 3.3

.. method:: window.getkey([y, x])

Get a character, returning a string instead of an integer, as :meth:`getch`
   does. Function keys, keypad keys and other special keys return a multibyte
   string containing the key name.  In no-delay mode, raise an exception if
   there is no input.

.. method:: window.getmaxyx()

Return a tuple ``(y, x)`` of the height and width of the window.

.. method:: window.getparyx()

Return the beginning coordinates of this window relative to its parent window
   as a tuple ``(y, x)``.  Return ``(-1, -1)`` if this window has no
   parent.

.. method:: window.getstr()
            window.getstr(n)
            window.getstr(y, x)
            window.getstr(y, x, n)

Read a bytes object from the user, with primitive line editing capacity.

.. method:: window.getyx()

Return a tuple ``(y, x)`` of current cursor position  relative to the window's
   upper-left corner.

.. method:: window.hline(ch, n)
            window.hline(y, x, ch, n)

Display a horizontal line starting at ``(y, x)`` with length *n* consisting of
   the character *ch*.

.. method:: window.idcok(flag)

If *flag* is ``False``, curses no longer considers using the hardware insert/delete
   character feature of the terminal; if *flag* is ``True``, use of character insertion
   and deletion is enabled.  When curses is first initialized, use of character
   insert/delete is enabled by default.

.. method:: window.idlok(flag)

If *flag* is ``True``, :mod:`curses` will try and use hardware line
   editing facilities. Otherwise, line insertion/deletion are disabled.

.. method:: window.immedok(flag)

If *flag* is ``True``, any change in the window image automatically causes the
   window to be refreshed; you no longer have to call :meth:`refresh` yourself.
   However, it may degrade performance considerably, due to repeated calls to
   wrefresh.  This option is disabled by default.

.. method:: window.inch([y, x])

Return the character at the given position in the window. The bottom 8 bits are
   the character proper, and upper bits are the attributes.

.. method:: window.insch(ch[, attr])
            window.insch(y, x, ch[, attr])

Paint character *ch* at ``(y, x)`` with attributes *attr*, moving the line from
   position *x* right by one character.

.. method:: window.insdelln(nlines)

Insert *nlines* lines into the specified window above the current line.  The
   *nlines* bottom lines are lost.  For negative *nlines*, delete *nlines* lines
   starting with the one under the cursor, and move the remaining lines up.  The
   bottom *nlines* lines are cleared.  The current cursor position remains the
   same.

.. method:: window.insertln()

Insert a blank line under the cursor. All following lines are moved down by one
   line.

.. method:: window.insnstr(str, n[, attr])
            window.insnstr(y, x, str, n[, attr])

Insert a character string (as many characters as will fit on the line) before
   the character under the cursor, up to *n* characters.   If *n* is zero or
   negative, the entire string is inserted. All characters to the right of the
   cursor are shifted right, with the rightmost characters on the line being lost.
   The cursor position does not change (after moving to *y*, *x*, if specified).

.. method:: window.insstr(str[, attr])
            window.insstr(y, x, str[, attr])

Insert a character string (as many characters as will fit on the line) before
   the character under the cursor.  All characters to the right of the cursor are
   shifted right, with the rightmost characters on the line being lost.  The cursor
   position does not change (after moving to *y*, *x*, if specified).

.. method:: window.instr([n])
            window.instr(y, x[, n])

Return a bytes object of characters, extracted from the window starting at the
   current cursor position, or at *y*, *x* if specified. Attributes are stripped
   from the characters.  If *n* is specified, :meth:`instr` returns a string
   at most *n* characters long (exclusive of the trailing NUL).

.. method:: window.is_linetouched(line)

Return ``True`` if the specified line was modified since the last call to
   :meth:`refresh`; otherwise return ``False``.  Raise a :exc:`curses.error`
   exception if *line* is not valid for the given window.

.. method:: window.is_wintouched()

Return ``True`` if the specified window was modified since the last call to
   :meth:`refresh`; otherwise return ``False``.

.. method:: window.keypad(flag)

If *flag* is ``True``, escape sequences generated by some keys (keypad,  function keys)
   will be interpreted by :mod:`curses`. If *flag* is ``False``, escape sequences will be
   left as is in the input stream.

.. method:: window.leaveok(flag)

If *flag* is ``True``, cursor is left where it is on update, instead of being at "cursor
   position."  This reduces cursor movement where possible. If possible the cursor
   will be made invisible.

If *flag* is ``False``, cursor will always be at "cursor position" after an update.

.. method:: window.move(new_y, new_x)

Move cursor to ``(new_y, new_x)``.

.. method:: window.mvderwin(y, x)

Move the window inside its parent window.  The screen-relative parameters of
   the window are not changed.  This routine is used to display different parts of
   the parent window at the same physical position on the screen.

.. method:: window.mvwin(new_y, new_x)

Move the window so its upper-left corner is at ``(new_y, new_x)``.

.. method:: window.nodelay(flag)

If *flag* is ``True``, :meth:`getch` will be non-blocking.

.. method:: window.notimeout(flag)

If *flag* is ``True``, escape sequences will not be timed out.

If *flag* is ``False``, after a few milliseconds, an escape sequence will not be
   interpreted, and will be left in the input stream as is.

.. method:: window.noutrefresh()

Mark for refresh but wait.  This function updates the data structure
   representing the desired state of the window, but does not force an update of
   the physical screen.  To accomplish that, call  :func:`doupdate`.

.. method:: window.overlay(destwin[, sminrow, smincol, dminrow, dmincol, dmaxrow, dmaxcol])

Overlay the window on top of *destwin*. The windows need not be the same size,
   only the overlapping region is copied. This copy is non-destructive, which means
   that the current background character does not overwrite the old contents of
   *destwin*.

To get fine-grained control over the copied region, the second form of
   :meth:`overlay` can be used. *sminrow* and *smincol* are the upper-left
   coordinates of the source window, and the other variables mark a rectangle in
   the destination window.

.. method:: window.overwrite(destwin[, sminrow, smincol, dminrow, dmincol, dmaxrow, dmaxcol])

Overwrite the window on top of *destwin*. The windows need not be the same size,
   in which case only the overlapping region is copied. This copy is destructive,
   which means that the current background character overwrites the old contents of
   *destwin*.

To get fine-grained control over the copied region, the second form of
   :meth:`overwrite` can be used. *sminrow* and *smincol* are the upper-left
   coordinates of the source window, the other variables mark a rectangle in the
   destination window.

.. method:: window.putwin(file)

Write all data associated with the window into the provided file object.  This
   information can be later retrieved using the :func:`getwin` function.

.. method:: window.redrawln(beg, num)

Indicate that the *num* screen lines, starting at line *beg*, are corrupted and
   should be completely redrawn on the next :meth:`refresh` call.

.. method:: window.redrawwin()

Touch the entire window, causing it to be completely redrawn on the next
   :meth:`refresh` call.

.. method:: window.refresh([pminrow, pmincol, sminrow, smincol, smaxrow, smaxcol])

Update the display immediately (sync actual screen with previous
   drawing/deleting methods).

The 6 optional arguments can only be specified when the window is a pad created
   with :func:`newpad`.  The additional parameters are needed to indicate what part
   of the pad and screen are involved. *pminrow* and *pmincol* specify the upper
   left-hand corner of the rectangle to be displayed in the pad.  *sminrow*,
   *smincol*, *smaxrow*, and *smaxcol* specify the edges of the rectangle to be
   displayed on the screen.  The lower right-hand corner of the rectangle to be
   displayed in the pad is calculated from the screen coordinates, since the
   rectangles must be the same size.  Both rectangles must be entirely contained
   within their respective structures.  Negative values of *pminrow*, *pmincol*,
   *sminrow*, or *smincol* are treated as if they were zero.

.. method:: window.resize(nlines, ncols)

Reallocate storage for a curses window to adjust its dimensions to the
   specified values.  If either dimension is larger than the current values, the
   window's data is filled with blanks that have the current background
   rendition (as set by :meth:`bkgdset`) merged into them.

.. method:: window.scroll([lines=1])

Scroll the screen or scrolling region upward by *lines* lines.

.. method:: window.scrollok(flag)

Control what happens when the cursor of a window is moved off the edge of the
   window or scrolling region, either as a result of a newline action on the bottom
   line, or typing the last character of the last line.  If *flag* is ``False``, the
   cursor is left on the bottom line.  If *flag* is ``True``, the window is scrolled up
   one line.  Note that in order to get the physical scrolling effect on the
   terminal, it is also necessary to call :meth:`idlok`.

.. method:: window.setscrreg(top, bottom)

Set the scrolling region from line *top* to line *bottom*. All scrolling actions
   will take place in this region.

.. method:: window.standend()

Turn off the standout attribute.  On some terminals this has the side effect of
   turning off all attributes.

.. method:: window.standout()

Turn on attribute *A_STANDOUT*.

.. method:: window.subpad(begin_y, begin_x)
            window.subpad(nlines, ncols, begin_y, begin_x)

Return a sub-window, whose upper-left corner is at ``(begin_y, begin_x)``, and
   whose width/height is *ncols*/*nlines*.

.. method:: window.subwin(begin_y, begin_x)
            window.subwin(nlines, ncols, begin_y, begin_x)

Return a sub-window, whose upper-left corner is at ``(begin_y, begin_x)``, and
   whose width/height is *ncols*/*nlines*.

By default, the sub-window will extend from the specified position to the lower
   right corner of the window.

.. method:: window.syncdown()

Touch each location in the window that has been touched in any of its ancestor
   windows.  This routine is called by :meth:`refresh`, so it should almost never
   be necessary to call it manually.

.. method:: window.syncok(flag)

If *flag* is ``True``, then :meth:`syncup` is called automatically
   whenever there is a change in the window.

.. method:: window.syncup()

Touch all locations in ancestors of the window that have been changed in  the
   window.

.. method:: window.timeout(delay)

Set blocking or non-blocking read behavior for the window.  If *delay* is
   negative, blocking read is used (which will wait indefinitely for input).  If
   *delay* is zero, then non-blocking read is used, and :meth:`getch` will
   return ``-1`` if no input is waiting.  If *delay* is positive, then
   :meth:`getch` will block for *delay* milliseconds, and return ``-1`` if there is
   still no input at the end of that time.

.. method:: window.touchline(start, count[, changed])

Pretend *count* lines have been changed, starting with line *start*.  If
   *changed* is supplied, it specifies whether the affected lines are marked as
   having been changed (*changed*\ ``=True``) or unchanged (*changed*\ ``=False``).

.. method:: window.touchwin()

Pretend the whole window has been changed, for purposes of drawing
   optimizations.

.. method:: window.untouchwin()

Mark all lines in  the  window  as unchanged since the last call to
   :meth:`refresh`.

.. method:: window.vline(ch, n)
            window.vline(y, x, ch, n)

Display a vertical line starting at ``(y, x)`` with length *n* consisting of the
   character *ch*.

Constants
---------

The :mod:`curses` module defines the following data members:

.. data:: ERR

Some curses routines  that  return  an integer, such as  :func:`getch`, return
   :const:`ERR` upon failure.

.. data:: OK

Some curses routines  that  return  an integer, such as  :func:`napms`, return
   :const:`OK` upon success.

.. data:: version

A bytes object representing the current version of the module.  Also available as
   :const:`__version__`.

Some constants are available to specify character cell attributes.
The exact constants available are system dependent.

Several constants are available to extract corresponding attributes returned
by some methods.

Keys are referred to by integer constants with names starting with  ``KEY_``.
The exact keycaps available are system dependent.

.. XXX this table is far too large! should it be alphabetized?

On VT100s and their software emulations, such as X terminal emulators, there are
normally at least four function keys (:const:`KEY_F1`, :const:`KEY_F2`,
:const:`KEY_F3`, :const:`KEY_F4`) available, and the arrow keys mapped to
:const:`KEY_UP`, :const:`KEY_DOWN`, :const:`KEY_LEFT` and :const:`KEY_RIGHT` in
the obvious way.  If your machine has a PC keyboard, it is safe to expect arrow
keys and twelve function keys (older PC keyboards may have only ten function
keys); also, the following keypad mappings are standard:

The following table lists characters from the alternate character set. These are
inherited from the VT100 terminal, and will generally be  available on software
emulations such as X terminals.  When there is no graphic available, curses
falls back on a crude printable ASCII approximation.

.. note::

These are available only after :func:`initscr` has  been called.

The following table lists the predefined colors:

:mod:`curses.textpad` --- Text input widget for curses programs
===============================================================

.. module:: curses.textpad
   :synopsis: Emacs-like input editing in a curses window.
.. moduleauthor:: Eric Raymond <esr@thyrsus.com>
.. sectionauthor:: Eric Raymond <esr@thyrsus.com>

The :mod:`curses.textpad` module provides a :class:`Textbox` class that handles
elementary text editing in a curses window, supporting a set of keybindings
resembling those of Emacs (thus, also of Netscape Navigator, BBedit 6.x,
FrameMaker, and many other programs).  The module also provides a
rectangle-drawing function useful for framing text boxes or for other purposes.

The module :mod:`curses.textpad` defines the following function:

.. function:: rectangle(win, uly, ulx, lry, lrx)

Draw a rectangle.  The first argument must be a window object; the remaining
   arguments are coordinates relative to that window.  The second and third
   arguments are the y and x coordinates of the upper left hand corner of the
   rectangle to be drawn; the fourth and fifth arguments are the y and x
   coordinates of the lower right hand corner. The rectangle will be drawn using
   VT100/IBM PC forms characters on terminals that make this possible (including
   xterm and most other software terminal emulators).  Otherwise it will be drawn
   with ASCII  dashes, vertical bars, and plus signs.

.. _curses-textpad-objects:

Textbox objects
---------------

You can instantiate a :class:`Textbox` object as follows:

.. class:: Textbox(win)

Return a textbox widget object.  The *win* argument should be a curses
   :ref:`window <curses-window-objects>` object in which the textbox is to
   be contained. The edit cursor of the textbox is initially located at the
   upper left hand corner of the containing window, with coordinates ``(0, 0)``.
   The instance's :attr:`stripspaces` flag is initially on.

:class:`Textbox` objects have the following methods:

.. method:: edit([validator])

This is the entry point you will normally use.  It accepts editing
      keystrokes until one of the termination keystrokes is entered.  If
      *validator* is supplied, it must be a function.  It will be called for
      each keystroke entered with the keystroke as a parameter; command dispatch
      is done on the result. This method returns the window contents as a
      string; whether blanks in the window are included is affected by the
      :attr:`stripspaces` attribute.

.. method:: do_command(ch)

Process a single command keystroke.  Here are the supported special
      keystrokes:

Move operations do nothing if the cursor is at an edge where the movement
      is not possible.  The following synonyms are supported where possible:

All other keystrokes are treated as a command to insert the given
      character and move right (with line wrapping).

.. method:: gather()

Return the window contents as a string; whether blanks in the
      window are included is affected by the :attr:`stripspaces` member.

.. attribute:: stripspaces

This attribute is a flag which controls the interpretation of blanks in
      the window.  When it is on, trailing blanks on each line are ignored; any
      cursor motion that would land the cursor on a trailing blank goes to the
      end of that line instead, and trailing blanks are stripped when the window
      contents are gathered.

cmd: